SPORT CAMS (STG 3 VCT Cam Set)

Brand: Esslinger Engineering
Product Code: SPORT CAMS VCT Cams
sku: CAMSET-DURVCT.STG3
Availability: In Stock

0 reviews / Write a review

$649.99

Description
Reviews (0)

Stage 3 cams are similar to our stage 2, but require aftermarket pistons with deeper valve reliefs.

*** Stage 3 cams require our valve spring kit found here: SPORT CAMS Ti Retainer Valvespring Kit ***

During back to back dyno testing on a mild 2.5L Ford Duratec street engine we logged the following gains:

Stage 3 SPORT CAMS gained +29hp & 13ft.lbs

At no point above 3600rpm did the SPORT CAMS make less power than OEM cams, and in addition to the huge gains across the middle part of the powerband, at 7200rpm the cams gained:

Stage 3 SPORT CAMS gained +43hp!

All testing was done on our engine dyno, using our shop 2.5L Duratec built for street use. Engine specs are as follows:

Esslinger upgraded Valve spring kit

Esslinger 13:1 compression pistons

+4mm "Long" rods

Balance shaft delete

MX-5 intake manifold w/ 62mm cable throttlebody

Esslinger spec Cometic Head Gasket

ARP Head & Main Studs

1-5/8" to 1-3/4" header w/ merged collector

Tuned with an AEM Infinity 508 ECU

Lucas Oil 30wt Break-in oil

No porting, no oversize valves, not even a performance valve job!

Cam Specs:

Intake - .429" lift & 235deg duration @ .050"

Exhaust .397" lift & 233deg duration @ .050"

All SPORT CAMS are sold as a pair of cams ground on brand new OEM cam cores and include our hardened shims to maintain the ability to use the OEM range of cam buckets for lash adjustment!

Tags: SPORT CAMS VCT Cams, SPORT CAMS VCT CamS, Camshafts